Azbil DCP31, Руководство пользователя

Страница: 32 / 242

2-8
Chapter 2. NAMES & FUNCTIONS OF PARTS
■
Functions using two or more keys
PROG
+
RUN/HOLD
: Reset keys
Press
RUN/HOLD
with
PROG
held down in the basic display state to reset the
controller.
The controller enters the READY mode in the RUN, HOLD, FAST or
END modes.
The controller cannot be reset in the READY mode by key operation.
PROG
+
DISP
: Advance keys
Press
DISP
with
PROG
held down in the program operation mode in the
basic display state to advance the program.
In the RUN, HOLD or FAST modes, the program advances to the next
segment.
The controller cannot advance in the READY mode by key operation.
FUNC
+ : Fast keys
Press with
FUNC
held down in the program operation mode in the
basic display state to fast-operate the program.
The controller enters the FAST mode from the RUN or HOLD modes.
FUNC
+
PARA
: Parameter setup keys
Press
PARA
with
FUNC
held down in the basic display state to move to se-
lection of the setting group (major items) in the parameter setup state.
FUNC
+
PROG
: Program setup (programming) keys
Press
PROG
with
FUNC
held down in the program operation mode in the
basic display state to move to the program setup (programming) state.
Press
PROG
with
FUNC
held down in the program setup state to change
the No. of the program to be set up in ascending order.
FUNC
+ : Program No. change keys
Press with
FUNC
held down in the program setup state to change
the No. of the program to be set up in descending order.
FUNC
+
CLR
: Program item delete keys
Press
CLR
with
FUNC
held down during entry of settings in the pro-
gram setup state to clear the setting.
FUNC
+
ENT
: Segment insert/delete keys
Press ENT with FUNC held down at SP or time item in the program
setup state to move to the segment insert/delete screen.
+
PROG
: Program copy keys
Press
PROG
with held down in the program operation READY
mode in the basic display state to move to the program copy screen.