Azbil DCP31, Руководство пользователя

Страница: 194 / 242

8-16
Chapter 8. PROGRAM SETUP
■
Setting up cycle items
(1) In the setting display state, move to the cycle items on the pro-
gramming map.
(The settings are common to all segments as the cycle items are
setting items provided for each program.)
(2) If you press
ENT
, the lower display starts blinking to indicate
start of entry to the No.1 setup.
(3) Press , , or to set to the No.1 setup cycle set-
ting.
Setting range: 0 to 9999
(4) When you press
ENT
, blinking on the lower display stops.
● ●
Display
• The settings are common to all segments as the cycle items are set-
ting items provided for each program.
• When setup data
C 7 1
is set to 1, cycle items on the programming
map are skipped and not displayed.
■
Setting up pattern link items
(1) In the setting display state, move to the pattern link items on the
programming map.
(The settings are common to all segments as the pattern link
items are setting items provided for each program.)
(2) If you press
ENT
, the lower display starts blinking to indicate
start of entry to the No.1 setup.
(3) Press , , or to set to the No.1 setup pattern
link setting.
Setting range: 0 to 19
0: Pattern link disabled
1 to 19: Pattern link destination program No.
(4) When you press
ENT
, blinking on the lower display stops.
Cycle count setting value
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
C Y C L