7-3
Chapter 7. PARAMETER SETUP
■
Changing individual items and how to return from the setup state
If you press
ENT
when an individual item is displayed, the setting
value blinks. This state is referred to as the “setting value entry
state.” In this state, pressing
or
can increment or decre-
ment the setting value that is blinking. Also, pressing
or
moves the position of the digit that is blinking.
If you press
ENT
when the setting value is at the desired value,
blinking stops, the display returns to its normally lit state, and the
new setting value is stored to internal memory.
To cancel changing of setting values, press
PARA
or
DISP
. When
PARA
is pressed, the value stops blinking and the display returns to its
normal lit state.
If you press
DISP
, the display returns to the basic display state. If
“- - - -” is displayed at the lower display when an individual item is
displayed, or the controller does not enter the setting value entry
state by pressing
ENT
, that item cannot be set nor changed.
• Example of individual item matrix (setup date)
C 0
1
C 0 2
C 0 3
C 0
1
C 0 2
C 0 3
C
1 1
C
1 2
C
1 3
C 8
1
C 8 2
C 8 3
C 9
1
C 9 2
C 9 3
C 9
1
C 9 2
C 9 3
C 9 9
C 0 0
C 0 9
C 1 0
C
1 9
C 2 0
C 8 9
C 9 0
C 9 9
C 0 0
C 0
1
C 0 9
C
1 0
C 0 0
