8-14
Chapter 8. PROGRAM SETUP
■
Setting up G.Soak (guarantee soak) items
(1) In the setting display state, move to the G.Soak item of the seg-
ment to be set up on the programming map.
(2) If you press
ENT
, the lower display starts blinking to indicate
start of entry to the No.1 setup.
(3) Press
,
,
or
to set to the G.Soak width setting.
Setting range: 0 to 1000 U
(4) When you press
ENT
, blinking on the lower display stops.
(When
FUNC
+
CLR
are pressed, the lower display returns to
“- - - -” and blinking stops.)
●
●
Display
• “- - - -” is displayed for the setting values in non-set segments.
The G.Soak function does not work in non-set segments.
• When setup data
C
7
0
is set to 1, G.Soak items on the program-
ming map are skipped and not displayed.
■
Setting up G.Soak time-out items
(1) In the setting display state, move to the G.Soak time-out item of
the segment to be set up on the programming map.
(2) If you press
ENT
, the lower display starts blinking to indicate
start of entry to the No.1 setup.
(3) Press
,
,
or
to set to the G.Soak time-out
width setting.
Setting range: 0:00 to 99:59 (h:min/min:s)
0.0 to 599.9 (0.1 s)
(Select either of h:min or min:s as the time unit in setup data
C
6
4
. “ :” is substituted by “ .” as it cannot be displayed.)
(4) When you press
ENT
, blinking on the lower display stops.
(When
FUNC
+
CLR
are pressed, the lower display returns to
“- - - -” and blinking stops.)
G.Soak setting value
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
G.
S.
