Chapter 7. PARAMETER SETUP
7 - 1
Parameter Setup
7-1
Parameters can be set up when the
DCP31
is in the basic display state.
If the
DCP31
is not in the basic display state, press
DISP
to set the controller to the basic display
state.
■
Selecting the setting group in the parameter setup
Parameter setup is divided into two stages: setting group (major
item) and individual item (minor item).
If you press
FUNC
+
PARA
in the basic display state, the display chang-
es to selection of setting group (major item), the setting group is
displayed on the upper display, and the lower display goes out.
If you press
PARA
,
or
, the setting group display changes
in order.
If you press
ENT
when the setup group to be selected is displayed,
the display moves to the individual (minor) item level.
The following table shows the setting groups:
Setting group 1 (major items) selection
Basic Display State
Setting group 2 (major items) selection
Setting group n (major items) selection
Individual items
Individual items
Individual items
DISP
key
FUNC
+
PARA
keys
ENT
key
PARA
key
ENT
key
PARA
key
ENT
key
PARA
key
, , , key
, , , key
, , , key
PARA
key
key
key
PARA
key
key
key
PARA
key
key
key
