ZYGO KMS-310, Supervisor Manual

Page: 85 / 304

KMS-310/400 Supervisor's Manual 4-35
Exit to DOS
The Exit to DOS window (Figure 4-17) is used to save your work and exit or the
Supervisor Master Menu screen. Uses for each Exit to DOS window selection are
listed in Table 4-18.
To display the Exit to DOS window:
1. From the Supervisor Master Menu screen, highlight the Exit to DOS icon.
2. Press [SELECT].
Figure 4-17. Exit to DOS Window
Button selections in the Exit to DOS window are shown in Table 4-18.
Table 4-18. Exit to DOS Window Selections
Button Function
Cancel Cancel the command and return to the Supervisor
Master Menu screen.
Save Save program and system settings and exit to DOS.
Exit Exit to a DOS window without saving your work.