ZYGO KMS-310, Supervisor Manual

Page: 234 / 304

7-16 Chapter 7: Operation
Set up Measurement Sequences
To set up a measurement sequence:
1. From the Supervisor Master Menu screen, select Sequence Setup .
The Measurement Sequence Setup window is displayed (Figure 7-14). This screen
lists the window setups that must be saved using the Save/Recall icon in the
Measure screen during program setup.
Figure 7-14. Measurement Sequence Setup Window
2. Highlight the save/recall number you want to be the first entry in the sequential
reading and press [SELECT].
The Measurement Sequence Setup subwindow is displayed (Figure 7-15).
Figure 7-15. Measurement Sequence Setup Subwindow