ZYGO KMS-310, Supervisor Manual

Page: 21 / 304

KMS-310/400 Supervisor’s Manual 2-7
Metal Halide Lamphouse and Power Supply Safety Labels
The Nikon metal halide lamphouse and power supply safety labels, located on
the front and side of the main lamphouse, are shown in Figures 2-7 and 2-8.
Figure 2-7 Metal Halide Lamphouse and Power Supply Safety Labels (Front)
1
2
Figure 2-8. Metal Halide Lamphouse and Power Supply Safety Labels (Side)
12
K2 Coupler Safety Label
The K2 coupler safety labels are shown in Figure 2-9.
Figure 2-9. K2 Coupler Safety Label
1 2
1
Alerts you to a potential infrared
radiation hazard. Never remove a
lamphouse or disconnect fiber optics
while the lamp is on. Never stare directly
into the beam path of any system light
source.
2
Alerts you to the potential hazard of
ultraviolet radiation. Never remove the
lamphouse or disconnect fiber optics
while the lamp is turned on. Do not stare
directly into the beam path of any light
source.
1
Refer to the KMS-310/400
Maintenance Manual before servicing.
2
Uninsulated dangerous voltage within
the lamphouse enclosure posing a risk of
electric shock. Never open the
lamphouse enclosure while lamp power
is on.
1
Alerts you to a potential
infrared radiation hazard. Never
remove a lamphouse or disconnect
fiber optics while the lamp is on.
Never stare directly into the beam
path of any system light source.
2
Alerts you to the potential
hazard of ultraviolet radiation.
Never remove the lamphouse or
disconnect fiber optics while the
lamp is turned on. Do not stare
directly into the beam path of any
light source.