ZYGO KMS-310, Supervisor Manual

Page: 75 / 304

KMS-310/400 Supervisor's Manual 4-25
Button selections in the Program Setup window are shown in Table 4-12.
Table 4-12. Program Setup Window Selections
Button/Label Function
Program name Enter the name of the program.
Multi-point file name Enter the multi-point file name.
Measurement units Set the unit of measurement as microns or micro inches.
One pass focus Use a single pass focus operation.
Force part ID at every
measurement Toggle on and off the force part ID at every measurement
selection.
Illumination info in
Save/Recall windows Toggle on and off the illumination information selection in
the Save/Recall window.
Terse data output for
measure logging Toggle on and off the terse data for measure logging
selection.
Logged data is sent to
printer too Toggle on and off the logged data sent to file selection.
Halogen lamp is
transmitted Toggle the Halogen lamp on and off.
Number of frames to
gather data Set the number of frames to gather data (limit 32).
Exit Return to the Supervisor Master Menu screen.