ZYGO KMS-310, Supervisor Manual

Page: 74 / 304

4-24 Chapter 4: User Interface
Program Setup Menu
Use the Program window (Figure 4-11) to select the correct measurement
program. The Program window lists the programs in the order they were used,
from top to bottom. Uses for each of the Program Setup screen buttons are listed
in Table 4-12. When a button is selected, the checkbox adjacent to the item turns
from white to black.
Selecting the correct program to operate is very important. The system will
always return to the last program used, even after power has been turned off.
L
Tip: Remember that each program contains calibration values that are unique to only one
total magnification. This requires that only one objective be used with that program if
correct measurements are to be obtained.
To display the Program window:
1. From the Supervisor Master Menu screen, highlight the Program Setup
icon.
2. Press [SELECT].
Figure 4-11. Program Menu Window