ZYGO KMS-310, Supervisor Manual

Page: 220 / 304

7-2 Chapter 7: Operation
Overview
This chapter provides detailed instructions for using the KMS-310/400 software in
supervisor mode.
L
Note: For an overview of the supervisor software screens, screen components and
software controls, refer to Chapter 4: User Interface.
This chapter is organized into the following sections (Figure 7-1):
ƒ
Overview , which provides an overview of the chapter's organization and procedures
contained in each chapter section.
ƒ
Access and Exit the Supervisor Master Menu Screen , which provides procedures
for accessing the Supervisor Master Menu screen, returning to the Standby screen
and exiting to DOS.
ƒ
Setup a Program, which provides procedures for creating, copying and deleting
programs, setting the operator lockouts, configuring sequence setup options,
measure windows setup and program measurement options.
ƒ
Measure, which provides procedures for measuring edges in manual, semi-
automatic and fully automatic modes.
ƒ
Manage Measurement Data, which provides procedures for managing
measurement statistics and ID entries, as well as configuring data maps.