ZYGO KMS-310, Supervisor Manual

Page: 222 / 304

7-4 Chapter 7: Operation
Access and Exit the Supervisor Master Menu
Screen
This section provides instruction for accessing and exiting the Supervisor Master Menu
screen, and consists of the following sections:
ƒ
Access the Supervisor Master Menu Screen
ƒ
Return to the Standby screen
ƒ
Exit to DOS
Access the Supervisor Master Menu Screen
In idle mode, the KMS-310/400 system displays the Standby screen (Figure 7-2). When
the system is first turned on,
Production is highlighted as the default selection. Both
production and supervisor software modes are accessed from this screen.
To access the Supervisor Master Menu screen:
1. Highlight Supervisor and press [SELECT] (Figure 7-2).
L
Note: When you are finished working in supervisor mode, always return to the Standby
screen to prevent access to supervisor mode operations by unqualified personnel.
Figure 7-2. Standby Screen