ZYGO KMS-310, Supervisor Manual

Page: 77 / 304

KMS-310/400 Supervisor's Manual 4-27
Button selections in the Sequence Setup window and subwindow are shown in
Table 4-13.
Table 4-13. Sequence Setup Window and Subwindow Selections
Window Button Function
c
Measurement
sequence setup Set up the measurement sequence setup.
Press [SELECT] to open the Sequence Setup
subscreen.
c
Default
measurement
setup Press [SELECT] to display the Measurement
Sequence Setup dialog box and set up the
default measurement.
c
Auto recall Toggle on or off the Auto Recall selection.
c
Exit Return to the Supervisor Master Menu window.
Measurement
Width
Offset
Depth
Toggle the measurement selection on or off.
Normal horizontal/vertical measurement
Not in use at this time
Measure differences in height between adjacent
surfaces.
d
Output
Select the method of calculation for data output
as
mean , min or max .
d
Limits Toggle the limits selection on or off to set the
minimum and maximum limits.
d
Exit Return to the Sequence Setup window
subscreen.