Network Installation
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
85
h.
For
Dynamic DNS Registration
, check the
[Enabled]
checkbox to enable
Dynamic DNS
Registration (DDNS)
.
Note:
If your DNS Server does not support dynamic updates there is no need to enable DDNS.
6.
In the
DHCP/DDNS
area:
a.
For
Release Registration
, check the
[Enabled]
checkbox, ONLY if you wish to release this
device's IP Address upon reboot. Default is unchecked.
7.
In the
Zero-Configuration Networking
area.
a.
For
Self Assigned Address
, check the
[Enabled]
checkbox, to support communicating with
other devices using 169.254/16 IPv4 addressing, over the same physical or logical link (such
as in ad hoc, or isolated (non- DHCP) networks). Refer to the IETF website for zeroconf details.
b.
For
Multicast DNS
, check the
[Enabled]
checkbox to resolve host names to IPv4 addresses
without using a conventional DNS server.
8.
Click on the
[Apply]
button to accept changes or
[Undo]
to return the settings to their previous
value.
9.
Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
Note:
Changing the device IP Address will impact other protocols: NetBIOS/IP, LPR/LPD, FTP,
SNMP and Raw TCP/IP Printing. These protocols will need to reference the new IP Address.
Disabling TCP/IP will impact other protocols: NetBIOS/IP, LPR/LPD, FTP, SNMP and Raw TCP/IP
Printing. This web user interface will be disabled until TCP/IP is re-enabled from the local user
interface.
IPv6
Note:
IPv6 is optional. It may be used in addition to, or in place of IPv4.
Note:
To configure this feature or these settings access the
Properties
tab as a System
Administrator. For details, refer to
Access Internet Services as System Administrator
on page 16.
1.
From the
Properties
tab, click on the
[Connectivity]
link.
2.
Click on the
[Protocols]
link.
3.
Select
[IP (Internet Protocol)]
in the directory tree, the
IP (Internet Protocol)
page displays.
4.
Ensure that
[IPv6]
is selected.
5.
In the
General
area:
a.
For
Protocol
, check the
[Enabled]
checkbox to enable the TCP/IP protocol.
Note:
If you do not check the
[Enabled]
checkbox for
Protocol,
you will not be able to access
Internet Services. TCP/IP must then be enabled from the device's user interface.
Note:
If you uncheck the
[Enabled]
checkbox for
[Protocol]
, the Network Controller will reboot.
This may require several minutes, during which time all network services will be unavailable.
b.
Enter a name which corresponds to the IP Address of the device in the
[Host Name]
field.
c.
[Physical Connection]
will display the physical network connection. This will display
“Ethernet”
.
d.
Enter details of an identifier of the IP site in which the device is connected in the
[Domain
Name]
field.
Summary of Contents for WORKCENTRE 5755
