manualshive.com logo in svg

Xerox WORKCENTRE 5755, System Administrator Manual

Share
Download
Xerox WORKCENTRE 5755 System Administrator Manual Download Page 68

Network Installation

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

60

b.

Touch

 [Save]

, then touch 

[Close] 

to return to the 

Tools

 pathway.

DNS/DDNS Configuration

1.

From the 

Tools 

pathway, touch 

[Network Settings]

.

2.

Touch 

[Network Setup]

.

3.

Touch 

[TCP IP]

.

4.

Touch 

[TCP/IP Settings]

.

5.

Touch

 [DNS Configuration]

, the 

DNS Configuration

 screen displays.

This feature will be inaccessible (grayed out) if TCP/IP protocol is not enabled.

a.

Touch the

 [Domain Name]

 button.

b.

Touch the bar under 

Domain Name

.

c.

Touch the 

[Clear Text]

 button to remove the default name before entering the new name 

using the on screen keyboard.

d.

Touch

 [Save]

.

e.

Touch

 [Save]

 to return to the 

DNS Configuration

 screen.

6.

Touch

 [Preferred DNS Server]

. 

a.

Touch each octet under the title and enter the Preferred DNS IP server address using the 
numerical keypad.

b.

Touch 

[Save]

, then touch

 [Close]

.

7.

Touch

 [Alternate DNS Servers]

 if required. 

a.

Touch the button under 

Alternate DNS Server

, enter the Alternate DNS Server IP Address 

using the on-screen keypad.

b.

Touch 

[Save]

 to return to the 

DNS Configuration

 screen.

Note:

If DHCP is enabled, the Alternate DNS server information is not available as a feature 

summary.

c.

Touch

 [Close]

 to return to the 

DNS Configuration 

screen.

Enable Dynamic DNS Registration

Note:

If your DNS server does not support dynamic updates, then this function does not need to 

be enabled.

8.

Touch

 [Dynamic DNS Registration]

, touch 

[Enable]

, then

 [Save]

 to return to the 

DNS 

Configuration

 screen.

9.

Press the 

<Log In/Out>

 button.

10. Touch 

[Logout

] to exit the Tools pathway.

Summary of Contents for WORKCENTRE 5755





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands