Xerox WORKCENTRE 5755, System Administrator Manual

Page: 75 / 356

Network Installation
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
67
Windows using Microsoft
(R)
Networking
NetBIOS over IP
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• An existing operational network utilizing the TCP/IP protocol.
• A Static IP Address for the machine.
• A Subnet Mask Address for the machine.
• A Gateway Address for the machine.
• A Host Name for the machine.
• Ensure device is connected to the network with an Ethernet Cable.
• The CentreWare Print and Fax Drivers CD (delivered with your machine).
At the Machine
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 10.
1. From the Tools pathway, touch [Network Settings] .
2. Touch [Network Setup] .
3. Touch [TCP/IP] .
4. Touch [TCP/IP Settings] .
5. In the TCP/IP Settings screen:
a. Touch the [Automatic Addressing] button.
b. Touch [Disabled] .
c. Touch [Save] .
6. Touch [IP Address/Host Name] , in the IP Address/Host Name screen:
a. For IPv4 Address , touch each octet and enter the IP address using the numerical keypad.
b. For Host Name , touch detail bar.
c. Enter Host Name using the on-screen keyboard. To access more characters, touch [123] on
the user interface.
d. Touch [Save] , then touch [Save] to return to the TCP/IP Settings screen.
7. Touch [Subnet and Gateway] , in the Subnet and Gateway screen:
a. For IP Gateway , touch each octet under the title and enter IP Gateway address using the
numerical keypad.
b. Repeat this process for the Subnet Mask . When you are finished, touch [Save] to accept the
changes and return to the TCP/IP Settings screen.
c. Touch [Close] to return to the TCP/IP screen.