General Setup
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
26
b.
Touch the
Left
and
Right
arrow, select the required value for the following:
•
Day (dd)
- the range will be dependant on the selected month.
•
Month (mm)
- the range is from 1 to 12.
•
Year (yy)
- the range is from 00 to 40.
6.
Select the
[Time]
tab.
a.
Select one of the following time format:
•
AM
•
PM
•
24 Hour
b.
Touch the
Left
and
Right
arrow, select the required value for the following:
•
Hours
- for a 12 hour format the range is 1 to 12 and for a 24 hour format the range is 0
to 23.
•
Minutes
- the range is 00 to 59.
•
If the 12 hour format is selected, select either
[AM]
or
[PM]
from the drop-down menu.
Note:
Any changes to these settings will require the device to reboot.
7.
Select the
[GMT Offset (Time Zone)]
.
a.
Touch the
Left
and
Right
arrows, selecting the required time zone.
8.
Touch
[Reboot]
, the system will reboot.
Using NTP
NTP (Network Time Protocol) is designed to synchronize the clocks of computers over a network. This
feature will ensure that the device’s internal clock stays synchronized with the NTP server you specify.
Note:
If you set up using
NTP
, the date and time of the system can be set using a network time
server (NTP). The system will check the server at boot time, every subsequent 24 hours, and any
time the NTP parameters are modified.
If the device is configured to use DHCP, and an NTP server, or the GMT offset is provided by the
DHCP server, then the data entered here will be overwritten by the corresponding DHCP retrieved
items. Enabling NTP or modifying NTP settings will cause a system reset.
At Your Workstation:
Note:
To configure this feature or these settings access the
Properties
tab as a System
Administrator. For details, refer to
Access Internet Services as System Administrator
on page 16.
1.
From the
Properties
tab, click on the
[Connectivity]
link.
2.
Click on the
[Protocols]
link.
3.
Select
[NTP]
in the directory tree.
4.
In the
Offset of Local Time Zone
area select the time offset (in hours) from the
[Offset of
Greenwich Mean Time]
drop-down menu. The default is 0.0.
5.
In the
Network Time Protocol
area:
a.
For
NTP Enabled
, check the
[Enabled]
checkbox to enable NTP on the device.
b.
Select one of the following:
Summary of Contents for WORKCENTRE 5755
