manualshive.com logo in svg

Xerox WORKCENTRE 5755, System Administrator Manual

Share
Download
Xerox WORKCENTRE 5755 System Administrator Manual Download Page 20

Device Connection and Quick Setup

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

12

Settings, to enable the use of the device web user interface for network and options configuration. If 
necessary, reset TCP/IP Addressing (including DHCP and DNS settings) and enable HTTP as follows:

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 10.

1.

From the 

Tools

 pathway, touch 

[Network Settings]

.

2.

Touch the 

[Network Setup]

 button, 

3.

Touch 

[TCP IP]

.

4.

From the 

TCP/IP

 screen, touch 

[HTTP/IPP Enablement]

.

a.

For 

Protocol

 touch 

[Enable]

.

b.

Touch 

[Save]

, to return to the TCP/IP screen.

5.

Touch 

[TCP/IP Settings]

.

6.

Configure TCP/IP settings, including DHCP (Dynamic Addressing) and DNS, touch 

[Save]

, touch 

the 

[Close]

 button to return to the Network Setting screen.

Note:

This device supports IPv6 Addressing, with an automatically-built Link Local Address for 

broadcasting to routers that can supply the network-layer configuration parameters. See

 

Configure Network Connectivity Protocols with Internet Services 

on page 17. 

Quick Setup

When your device is configured with an IP Address and HTTP is enabled, you can configure network 
information from your web browser via Internet Services. Enter the IP Address of the device in your web 
browser to access Internet Services. For further information, refer to 

Internet Services 

on page 13.

Summary of Contents for WORKCENTRE 5755





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands