USB Printer Port
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
330
The Configuration Report will print. On the report, check under
USB Printer Port Settings
heading
to verify that
USB Port Enabled
is enabled.
8.
Connect your workstation or laptop to the device with a USB cable.
9.
Install Print Driver. For Details, refer to
Print Drivers
on page 129.
At the Device:
Note:
To configure this feature or these settings access the
Tools
pathway as a System
Administrator. For details, refer to
Access Tools Pathway as a System Administrator
on page 10.
1.
From the
Tools
pathway, touch
[Network Settings]
.
2.
Touch
[USB Printer Port]
. The
USB Settings
screen displays.
a.
For
USB Connection Mode
, touch
[Direct Printing via Driver]
.
b.
For
Print Timeout (Seconds)
, set time in seconds using the
up
and
down
arrow buttons. The
range is 0 - 60.
c.
To disable the Print Timeout set the value to
0
.
d.
Touch
[Save]
.
3.
Press the
<Log In/Out>
button.
4.
Touch
[Logout]
to exit the Tools pathway.
5.
Connect your workstation or laptop to the device with a USB cable.
6.
Install Print Driver. For Details, refer to
Print Drivers
on page 129.
Summary of Contents for WORKCENTRE 5755
