manualshive.com logo in svg

Xerox WORKCENTRE 5755, System Administrator Manual

Share
Download
Xerox WORKCENTRE 5755 System Administrator Manual Download Page 331

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

323

24

Software Upgrade

The Software Upgrade feature allows the customer to upgrade the device software as requested by a 
Xerox Customer Support Center Representative, without needing a Customer Service Representative to 
be present.

When Should I Upgrade the Software?

Xerox is continually seeking to improve its products and a software revision may become available to 
improve functionality on the device. Your Customer Support Center Representative will instruct you to 
upgrade your device when it is necessary.

How Do I Upgrade the Software?

IMPORTANT: Any jobs in the queue must be allowed to complete or be deleted before initiating a 
software upgrade.

There are three methods for upgrading the software on the device:

•

Over a network connection using Internet Services via a web browser.

•

Auto upgrade.

•

USB Stick and DLM.

1. Software Upgrade Over a Network Connection

If your device is connected to the network, it is possible to upgrade the software through Internet 
Services. The device will need to be configured for TCP/IP and HTTP.

2. Auto Upgrade

If performing a software upgrade on the device via Internet Services it is possible to set the Auto 
Upgrade feature to schedule automatic device software upgrades from a central server at a specific 
time on a regular basis.

3. Software Upgrade via the USB Port

If your device does not have a network connection it is possible to upgrade the software by connecting 
a workstation or a laptop to the USB port.

Summary of Contents for WORKCENTRE 5755





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands