Xerox Secure Access
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
319
To Configure Xerox Secure Access on the Device
Note:
Before you complete these steps ensure that the Xerox Secure Access authentication server
has been configured to point to the device.
1.
From the
Authentication Configuration
screen, in the
Current Configuration
area:
a.
Click on the
[Configure]
button for
Device User Interface Authentication - Xerox Secure
Access
.
b.
The device will automatically configure itself to work with the XSA remote server. Click on the
[Manually Configure]
button if the XSA remote server does not configure automatically.
c.
In the
Server Communication
area, select either
[IPv4 Address]
or
[Hostname]
.
d.
Enter details in the
[IP Address: Port]
or
[Host Name:
Port]
fields.
e.
Enter the details in the
[Path]
field.
Note:
Enter the HTTP path of
[public/dce/xeroxvalidation/convauth]
and port number of
[1824]
to facilitate communication.
f.
Under the
Device Log In Methods
heading, select one of the following:
•
Xerox Secure Access Device Only (e.g., Swipe Cards
- if you want to allow the user to
swipe their swipe cards at the UI.
•
Xerox Secure Access alternate on-screen authentication method
- if you
want users to authenticate using the device’s control panel as well as the XSA feature.
When the second option is enabled, a button labelled “Alternate Login” is displayed on
the “Instructional Blocking Window” providing users with an alternate method to log in.
For example, this feature can be enabled for users who are unable to use their swipe
card. When the alternate button is selected, the remote server presents a series of log in
screens on the local user interface. The remote server is still responsible for
authenticating the user. All other Xerox Secure Access options are supported with this
setting.
g.
Under the
Accounting Information
heading, note that this item will be grayed out if
Network Accounting is not enabled. If accounting is enabled, select
[Automatically apply
Accounting Codes from the server]
, if the Secure Access Server has been configured to
return the accounting User ID and Account ID login. If you want the user to enter these
values at the local user interface during login, select
[User must manually enter accounting
codes at the device]
.
h.
Under the
Device Instructional Blocking Window
heading, enter text in the
[Window Title]
and
[Instructional Text]
fields to create the prompt that will be displayed on the device’s
user interface informing users how to authenticate themselves at the device.
Note:
If the Title and Prompt have been configured on the Secure Access Server, then this
information will override the Title and Prompt text entered here.
i.
Click on the
[Save]
button when done.
2.
Click on the
[Close]
button to return to the
Authentication Configuration
page.
Enable Web User Interface Authentication
A second, networked Authentication Server will be necessary for web user interface Authentication, if
Remotely on the Network
was selected. Full instructions for configuring network authentication, using
Summary of Contents for WORKCENTRE 5755
