Security
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
172
Security Policies: To Enable IP Sec
Note:
IP Sec cannot be enabled until SSL (Secure Sockets Layer) is enabled on the device. To
enable SSL on a device, the device needs to have a Server Certificate. For instructions to set up a
Server Certificate, refer to
Machine Digital Certificate Management
on page 167.
Note:
To configure this feature or these settings access the
Properties
tab as a System
Administrator. For details, refer to
Access Internet Services as System Administrator
on page 16.
1.
From the
Properties
tab, click on the
[Security]
link.
2.
Select
[IP Sec]
in the directory tree.
3.
Ensure
[Security Policies]
tab is highlighted under the
IPsec
heading.
4.
In the
Settings
area, check the
[Enabled]
checkbox for
Enablement
enable the IP Sec.
5.
Click on the
[Apply]
button.
Note:
It is recommended that IP Sec is enabled after the Host Groups, Protocol Groups and Action
have been configured and defined.
Define Policy
An IPsec Policy is a set of conditions, configuration options and security settings which allows two
systems to agree on how to secure traffic between them. Multiple policies can be simultaneously
active, however the scope and policy list order may alter the overall policy behavior.
Note:
Before creating Policies, configure Host Groups, Protocol Groups and Actions.
6.
In the
Define Policy
area, there are three policy options:
•
Hosts Groups
•
Protocol Groups
•
Action
This area allows you to select settings for allowing or disallowing Hosts and Protocols and what
action to be taken.
7.
For each individual option select settings from each drop-down menu.
8.
Click on the
[Add Policy]
button.
Saved Policies
9.
In the
Saved Policies
area, there will be a list of all the policies saved.
10. To delete a policy, highlight the policy and click on the
[Delete]
button.
11. Also you can prioritise an individual policy by clicking the
[Promote]
and
[Demote]
buttons.
Disable IP Sec at the device
Note:
To configure this feature or these settings access the
Tools
pathway as a System
Administrator. For details, refer to
Access Tools Pathway as a System Administrator
on page 10.
1.
From the
Tools
pathway, touch
[Network Settings]
.
2.
Touch
[IP Sec]
.
3.
Touch
[Disable]
, then touch
[Save]
.
4.
Press the
<Log In/Out>
button.
5.
Touch
[Logout]
to exit the Tools pathway.
Summary of Contents for WORKCENTRE 5755
