Network Installation
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
100
Raw TCP/IP Printing
Note:
TCP/IP must be enabled before Raw TCP/IP Printing is enabled.
Raw TCP/IP is a printing method used to open a TCP socket-level connection, over Port 9100, to stream
a print-ready file to the printer's input buffer, and then to close the connection after sensing an End Of
Job indicator in the Page Description Language, or after expiration of a preset timeout value. Port
9100 printing does not require a Line Printer Request (LPR) from the workstation, or the use of a Line
Printer Daemon (LPD) running on the printer. Raw TCP/IP printing is selected in Windows 2000 as the
Standard TCP/IP port.
Note:
To configure this feature or these settings access the
Properties
tab as a System
Administrator. For details, refer to
Access Internet Services as System Administrator
on page 16.
1.
From the
Properties
tab, click on the
[Connectivity]
link.
2.
Click on the
[Protocols]
link.
3.
Select
[Raw TCP/IP Printing]
in the directory tree, the
Raw TCP/IP Printing
page displays.
4.
In the
General
area:
a.
For
Protocol,
check the
[Enabled]
checkbox to enable Raw TCP/IP Printing.
Physical Connection
displays the physical network connection, this will always display
“Ethernet”
.
5.
Up to three ports may be enabled and configured, in the
Port Information
area:
a.
For
Port 1
Leave the
TCP Port Number
set to 9100. If two additional ports are available, click
on the
[Default All]
button to check if they set to 9101 and 9102 respectively (emulating HP
JetDirect EX Plus 3).
b.
Leave the
Bidirectional
(
[Enabled]
) checkboxes and
Maximum Connections per Port
settings at their default values.
c.
Set the
[End of Job Timeout]
to the number of seconds to wait before processing a job
without an End Of Job indicator. The range is from 1 to 65535, and the default is 300.
d.
Leave the
PDL Switching
(
[Enabled]
) checkbox at its default value.
Note:
Do not check the
[Enabled]
checkbox for
PDL Switching
, when Windows clients print is
using port 9100. this prevents each print job from generating a banner page.
6.
Click on the
[Apply]
button to accept the changes or
[Undo]
to return the settings to their
previous values, or
[Default All]
to enter printer defaults for all settings (recommended).
7.
Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
To add additional options, from the
Raw TCP/IP Printing
screen, click on the
[Advanced]
button.
8.
In the
Connections
area:
a.
For
Maximum Concurrent Connections per Port (1-32)
, enter a value between 1 and 32 to
specify the maximum number of concurrent connection allowed.
b.
For
Maximum Concurrent Jobs per Connection (0-500)
, enter a value between 0 and 500 to
specify the maximum number of concurrent jobs per connection allowed.
c.
For
Total Job Limit per Connection (0 - 32768)
, enter the required job limit that can be
active per port between 1 and 32768. This setting limits the total number of jobs accepted on
a single connection. After the limit is reached and all jobs complete printing, port 9100 loses
the connection.
Summary of Contents for WORKCENTRE 5755
