l
Remove the cotter valves (2 nos.) from the
valve stem. (Fig. 3.50)
Nose plier
l
Loosen and take out the special tool.
l
Remove the cotters of other inlet valve in
similar manner.
l
Remove the retainer valve springs and spring
valves. (Fig. 3.51)
l
Gently push down the valves from the top and
remove it from the combustion chamber side.
(Fig. 3.52)
Note:
While removing the valve, check for the
free movement of the valve. If there is no
free movement, check the valve for bend
and runout. Replace the valve incase of
bend or runout.
l
Remove the seal valve stem oil from the valve
guides. (Fig. 3.53)
Nose plier
Note:
While reassembling, replace the seals
valve stem oil with a new one. Always use
non metal cladding seal valve stem oil.
Fig. 3.50
Fig. 3.51
Fig. 3.52
Fig. 3.53
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
3-15
