Fig. 5.70
Fig. 5.71
A
A
B
Fig. 5.72
A
B
TVS APACHE RTR 200
SERVICE MANUAL
ELECTRICAL SYSTEM
5-27
l
Turn the selector knob (A) of the charger to the
0.9 amps position incase of multiple battery
charger. (Fig. 5.70)
Caution:
Ensure to select the charging current
based the battery amphere only. If more
or less current is selected the battery may
get damaged.
l
Connect the battery charger to the power
supply and switch on the power.
l
Switch on the ‘MAINS ON-OFF’ switch (A) and
ensure that the ‘MAINS-ON’ LED indicator (B)
is glowing. (Fig. 5.71) If this indicator is not
glowing, then check the main fuse of the
charger and replace the fuse if required.
l
Now, the ‘CHARGING’ LED indicator (A) glows
and indicates the battery is getting charged. If
this indicator is not glowing, check whether
‘LO-BATTERY’ LED indicator (B) is glowing.
(Fig. 5.72)
l
If the ‘LO-BATTERY’ LED indicator is glowing,
it indicates that the battery voltage is very less
and it can’t be charged further. Replace the
battery with a new one.
l
After charging the battery for few hours (time
may vary based on the battery voltage and
capacity) ‘CHARGED’ LED indicator (A) of
charger glows and indicates that the battery is
charged. (Fig. 5.73)
Fig. 5.73
A
