l
Remove the hexagonal flange bolt (M8x100 -
1 no.) and (M8x120 - 1 no.) from the mounting
of bracket engine mounting RH and take out
the bracket. (Fig. 3.136)
12 mm spanner
Tightening torque
27
± 3 Nm
l
Remove the hexagonal flange bolt (M18x100 -
1 no.) and (M8x120 - 1 no.) from the rear
mounting of the engine assembly. (Fig. 3.137)
12 mm spanner
Tightening torque 27
± 3 Nm
Note:
While removing mounting bolts, always
remove the bottom bolt first.
Once the ‘U’ nuts are removed from its
mounting, it should be replaced with a
new one.
l
Gently lift the engine assembly with both the
hands and take out from the right hand side of
the vehicle. Place the engine assembly on a
engine rest.
ENGINE - DISASSEMBLY
l
Remove the CRR pan head screw (M6x12 -
1 no.) from the retainer guide T/M oil and
remove the guide T/M oil. (Fig. 3.138)
Phillip head screw driver
Tightening torque
8 ± 2 Nm
l
Remove the hexagonal flange bolt (M6x55 -
1 no.) from the crankcase assembly mounting
(RH side). (Fig. 3.139)
8 mm spanner
Tightening torque
10 ± 2 Nm
l
Turn the engine to the other side (magneto
side).
Fig. 3.137
Fig. 3.136
Fig. 3.139
Fig. 3.138
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
3-40
