Fig. 6.25
Fig. 6.26
Fig. 6.28
Fig. 6.27
l
Remove caliper assembly mounting bolts and
brake pads as explained in page no. 6-5.
l
Remove the spring pad from the caliper
housing. (Fig. 6.25)
Nose plier
l
Dislocating the boot-B and bush boot pin from
the pin grooves and slide out the bracket
complete front. (Fig. 6.
)
26
l
Carefully pull out the boots from the caliper
assembly housing. (Fig. 6.27)
l
Insert a spacer in between the piston caliper
and the caliper body (at pad position) and then
apply compressed air through inlet port of the
caliper to slide both the pistons out. (Fig. 6.28)
Caution:
Be careful while applying compressed air
as it pushes the pistons forcefully. Do not
use high pressure air which may damage
to pistons.
Note:
Do not try to pull out single piston as the
compressed air cannot push the second
piston.
Do not use nose plier to pull out the pistons
as it damages the piston.
TVS APACHE RTR 200
SERVICE MANUAL
CHASSIS
6-10
