Fig. 3.4
Fig. 3.5
Fig. 3.6
Fig. 3.7
l
Dislocate the cable assembly clutch from the
bracket clutch cable. (Fig. 3.4)
l
Place a plastic tray under the engine to collect
the remaining oil in the engine while removing
the cover clutch.
l
Remove the hexagonal flange bolt (M6x25 -
1 no.) from the pipe complete outlet of engine
oil cooler and dislocate the pipe from the cover
clutch casting. (Fig. 3.5)
8 mm spanner
Tightening torque
10 ± 2 Nm
l
Remove the hexagonal socket head cap screw
(M6x16 - 1 no.) from the cover clutch
mounting. (Fig. 3.6)
4 mm allen key
Tightening torque
10 ± 2 Nm
Caution:
While reassembling, ensure to assemble
the hexagonal socket head cap screw
without fail to avoid leakage of oil.
l
Remove the hexagonal flange bolts (M6x35 -
11 nos.) from the cover clutch mounting.
(Fig. 3.7)
8 mm spanner
Tightening torque
10 ± 2 Nm
l
Take out cover clutch by gently tapping at the
ends using nylon hammer.
Nylon hammer
l
Take out gasket cover clutch and dowel pin
clutch cover (2 nos).
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
3-3
