Fig. 2.13
Fig. 2.14
Fig. 2.15
l
Remove hexagonal socket cap screw (M5x30 -
3 nos.) from the mounting of fuel tank cap
assembly. (Fig. 2.13)
4 mm allen key
Tightening torque
4.5 ± 0.5 Nm
Note:
Remove only the marked screws (refer
Fig. 2.13). Do not disturb the other screws
as they do not required any removal.
Caution:
Do not use the screws having more than
14 mm length as it may puncture the tank
and lead to fuel leakage.
l
Open the fuel tank cap by using the control
key. (Fig. 2.14)
l
Remove the CRR pan head screw (M5x12)
from the fuel tank cap inner mounting.
(Fig. 2.15)
Phillips head screw driver
Tightening torque
4.5 ± 0.5 Nm
l
Take out the fuel tank cap assembly along with
seal fuel tank cap.
Note:
Ensure the presence of seal in the fuel cap
assembly before re-installing the cap.
l
Carefully dislocate and remove the cover fuel
tank assembly from the fuel tank.
l
Remove the CRR flanged pan head tap screw
(ST4.2x13 - 3 nos.) from the mounting of cover
fuel tank inner R. (Fig. 2.16)
Phillips head screw driver
Tightening torque
1 ± 0.5 Nm
l
Dislocate the cover fuel tank inner R from the
cover fuel tank assembly.
Fig. 2.16
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
2-7
A
B
C
