l
Remove the hexagonal bolts (M6x16 - 4 nos.)
from both LH & RH mounting wheel hugger
rear mounting. (Fig. 2.95A & B)
10 mm spanner
Tightening torque
8 ± 2 Nm
l
L o o s e n t h e h e x a g o n a l f l a n g e d U - n u t
(M14x1.5) of axle rear. Fig. 2.96A)
(
22 mm spanner
Tightening torque
78 ± 18 Nm
l
Similarly, loosen the chain adjuster bolts (A and
B) to some extended in order to remove the
chain. (Fig. 2.96B)
12 mm spanner
l
Remove the hexagonal bolts (M6x12 - 2 nos.)
along with the washers from the chain guard.
(
Fig. 2.97)
10 mm spanner
Tightening torque
8 ± 2 Nm
l
Push the rear wheel from the back towards
front so that the drive chain loosens and hangs
as shown. (Fig. 2.98)
l
Now, lift the chain guard upward. Gently take
out the drive chain by dislocating it from the
rear sprocket and swing arm assembly.
l
Clean the drive chain by dipping it in kerosene.
Brush off any dirt / dust sticking to it.
l
Drain / dry the kerosene by hanging the chain
for 5 minutes.
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
2-35
Fig. 2.97
Fig. 2.96A
Fig. 2.95A
Fig. 2.96B
Fig. 2.95B
A
C
B
Fig. 2.98
