Fig. 4.13
Fig. 4.14
Fig. 4.15A
Fig. 4.16A
Fig. 4.16B
Fig. 4.15B
DISASSEMBLY
l
Pull out the hose air vent (A) and drain hose (B)
by dislocating clips. (Fig. 4.13)
Nose plier
l
Remove CRR. pan head screws (2 nos.) and
take out cover diaphragm. (Fig. 4.14)
Phillips head screw driver
l
Take out spring piston valve. (Fig. 4.15A)
l
Remove piston valve assembly along with the
diaphragm. (Fig. 4.15B)
l
Remove the adjuster pilot screw (mixture
control screw) (A) along with spring, washer,
and ‘O‘ ring. (Fig. 4.16A)
Small flat screw driver
l
Loosen and remove idle adjuster screw (B)
along with spring and washer. (Fig. 4.16B)
Note:
While reassembling the pilot screw ensure
to replace the ‘O’ ring with a new one.
TVS APACHE RTR 200
SERVICE MANUAL
FUEL, LUBRICATION AND
EXHAUST SYSTEM
4-6
A
B
A
B
