l
Pull out the sprocket engine along with drive
chain assembly from shaft drive. (Fig. 3.104)
l
Dislocate sprocket from the drive chain. Hang
the drive chain in the frame itself.
l
Disconnect the speed sensor wiring socket
from the main wiring harness. (Fig. 3.105)
l
Remove hexagonal bolt (A) (M6x16 - 1 no.) and
dislocate the guide speed sensor (B).
(Fig. 3.106A)
l
Remove the hexagonal bolt (C) (M6x16 -
2 nos.) from the retainer oil seal drive shaft and
take out the retainer (D). (Fig. 3.106B)
8 mm spanner
Tightening torque
10 ± 2 Nm
l
Gently pull out the speed sensor (E) along with
guide speed sensor. (Fig. 3.106B)
Nose plier
l
Remove the hexagonal flange bolt (M6x16 -
2 nos.) and take out the switch gear position
(A). (Fig. 3.107)
8 mm spanner
Tightening torque
10 ± 2 Nm
Fig. 3.105
Fig. 3.104
Fig. 3106A
Fig. 3106B
Fig. 3.107
A
A
C
C
D
E
B
3-32
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
