l
If any play is found, remove the CRR pan head
screw (M6x20 - 2 nos.) housing head lamp
front top mounting. (Fig. 2.77)
Phillips head screw driver
Tightening torque
3 ± 1 Nm
l
Loosen both side bottom mounting hexagonal
flange bolt of housing head lamp and tilt the
housing head lamp forward. (Fig. 2.78)
10 mm spanner
Tightening torque
4.5 ± 1.5 Nm
l
Take out the cap lock nut (A) and remove the
lock nut steering along with a special washer.
(Fig. 2.79)
32 mm spanner
Tightening torque
80 ± 20 Nm
l
Loosen hexagonal socket head cap screws (A)
(M8x30 - 2 nos.) from the mounting of handle
bar assembly with the front fork. (Fig. 2.80)
6 mm allen key
Tightening torque
16 ± 2 Nm
l
Similarly, loosen hexagonal socket head cap
screws (B) (M8x45 - 2 nos.) from the mounting
of lower bracket complete (fork upper
mounting). (Fig. 2.80)
Tightening torque
19 ± 2 Nm
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
2-29
Fig. 2.77
Fig. 2.78
Fig. 2.79
Fig. 2.80
A
A
B
B
A
