l
Dislocate the fork gear shift no.1, fork gear
shift no. 2 and fork gear shift high speed from
cam gear shift and take out the cam gear shift
(A). (Fig. 3.148)
l
Take out fork gear shift no.1, fork gear shift no.
2 and fork gear shift high speed from gears.
(Fig. 3.149)
l
Take out drive shaft assembly and the counter
(clutch) shaft assembly along with the gears as
a set. (Fig. 3.150)
l
Take out the gear 2nd driven. (Fig. 3.151)
Note:
Since the gear idler (speed sensor gear)
locks the 2nd driven gear, it will not come
along with the drive shaft assembly during
the shaft removal. Hence the gear has to be
taken separately.
Fig. 3.148
Fig. 3.149
A
3-43
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
Fig. 3.150
Fig. 3.151
