TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
2-46
l
Disconnect the spring of stop lamp switch
from the rear brake pedal. (Fig. 2.125)
Nose plier
Note:
Ensure to reconnect the spring during
reassembly for proper working of brake
lamp.
l
Remove the hexagonal socket head cap screw
(M10x25 - 1 no.) along with punched washer
from the rider foot rest assembly RH.
(Fig. 2.126)
8 mm allen key
Tightening torque
18 ± 2 Nm
l
Remove the CRR pan head screw (M6x16 -
1 no.) from the rider foot rest assembly RH top
mounting. (Fig. 2.127)
Phillips head screw driver
Tightening torque
10 ± 2 Nm
l
Draw out shaft complete swing arm by gently
tapping at the other side. (Fig. 2.128)
Nylon hammer
Note:
Use a suitable guide in place of shaft
complete swing arm to prevent the swing
arm declining from its position.
Fig. 2.125
Fig. 2.126
Fig. 2.127
Fig. 2.128
