3-12
l
Gently pull out the sprocket cam shaft using
nose plier and dislocate the cam chain from
cam sprocket. (Fig. 3.38)
Caution:
Care should be taken not to drop the cam
chain inside the crankcase assembly while
dislocating.
l
Hold the cam chain using a good quality copper
wire to prevent the chain from falling into the
crankcase assembly and hang it on the head
assembly itself.
l
Take out the washer camshaft sprocket from
the camshaft. (Fig. 3.39)
Nose plier
l
Take out the cam chain tensioner by removing
the bolt cam chain tensioner along with
washer cam chain tensioner. (Fig. 3.40)
12 mm spanner
Tightening torque
12 ± 2 Nm
l
Remove the bolt cylinder head (4 nos.) from
the mounting of cylinder head complete.
(Fig. 3.41)
12 mm spanner
Tightening torque
24.5 ± 2.5 Nm
Note:
While reassembling, always tighten the
cylinder head assembly bolts in criss-cross
pattern to have uniform seating.
Fig. 3.38
Fig. 3.39
Fig. 3.40
Fig. 3.41
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
