Fig. 3.8
Fig. 3.9
Fig. 3.10
Fig. 3.11
l
Take out adopter pin clutch release from the
clutch assembly along with a ball (dia. 3/16).
(Fig. 3.8)
Caution:
While reassembling ensure to assemble
the ball without fail.
l
Remove the hexagonal flange head bolts
(M6x25 - 4 nos.) from the plate clutch release
mounting. (Fig. 3.9)
10 mm spanner
Tightening torque
10 ± 2 Nm
Note:
Please follow the uniform loosening and
tightening of plate clutch release bolts to
avoid uneven loading of plate.
l
Take out plate clutch release.
l
Take out the spring clutch (4 nos.). (Fig. 3.10)
Caution:
While reassembling, ensure all the four
clutch springs are having same colour
grade.
l
Using special tool hold the disc clutch pressure
and remove nut clutch shaft (slotted nut).
(Fig. 3.11)
N231 001 0
Clutch holding tool
N231 002 0
Clutch nut tightening tool
27 mm spanner
Tightening torque
60 ± 10 Nm
Caution:
Assemble all the four bolts of plate clutch
release with the clutch holding special
tool. Do not experiment with two bolts
mounted diagonally as it may damage the
disc clutch pressure.
TVS APACHE RTR 200
SERVICE MANUAL
SERVICING OF ENGINE
3-4
