Fig. 6.37
Fig. 6.38
Fig. 6.39
Fig. 6.40
l
Remove the master cylinder fluid reservoir cap
by unscrewing screws (2 nos.). (Fig. 6.37)
Phillips head screw driver
Tightening torque
1.5 ± 0.5 Nm
l
Take out plate diaphragm and diaphragm from
the reservoir.
l
Take out the master cylinder by unscrewing
the mounting bolts (2 nos.) of holder master
cylinder. (Fig. 6.38)
10 mm spanner
Tightening torque
10 ± 2 Nm
Note:
Hold the master cylinder while removing
the holder mounting bolts in-order to
avoid falling.
l
Remove the mounting screw of stop lamp
switch and take out the stop lamp switch.
(Fig. 6.39)
Phillips screw driver
l
Remove the dust boot from the master
cylinder using a blunt tool. (Fig. 6.40)
Note:
While removing boot, care must be taken
not to damage it.
TVS APACHE RTR 200
SERVICE MANUAL
CHASSIS
6-14
