Toyota 2007 Highlander Owner'S Manual Download Page 306

Page: 306 / 439

’07 HIGHLANDER_U (L/O 0608)

282

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

REMOVING  LUGGAGE  COVER
To  remove  the  luggage  cover,  push  in
the  left  end  to  release  the  right  end,

and lift the luggage cover out.

After you remove the luggage cover, stow

it under deck board as described below.

This will prevent passengers from injury in
the event of a sudden stop or accident.

STOWING LUGGAGE COVER
To stow the luggage cover, do the fol-
lowing.

1. Remove the side deck boards and

open the center deck board.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands