Toyota 2007 Highlander Owner'S Manual Download Page 112

Page: 112 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

To avoid potential death or serious
injury when the front passenger occu-

pant classification system does not

detect the conditions correctly, ob-
serve the following.

Do not recline the front passenger

seat seatback so that it interferes

with a second seat as it may cause

the “AIRBAG OFF” indicator light

be illuminated. If the seatback inter-

feres with the second seat, return

the seatback to a position where it

does not interfere with the second

seat.
Keep the front passenger seatback

as upright as possible when the ve-

hicle is moving. Reclining the seat-
back excessively may lessen the ef-

fectiveness of the seat belt system.

Make sure the “AIRBAG ON” indica-

tor light is illuminated when using

the seat belt extender for the front

passenger seat. If the “AIRBAG

OFF” indicator light is illuminated,

disconnect the extender tongue

from the seat belt buckle, then re-

connect the seat belt. Reconnect

the seat belt extender after making

sure the “AIRBAG ON” indicator

light is illuminated. If you use the

seat belt extender while the “AIR-

BAG OFF” indicator light is illumi-

nated, the front passenger airbag

and side airbag on the front pas-

senger side may not activate cor-

rectly, which could cause death or

serious injury in the event of colli-

sion.

If an adult sits in the front

passenger seat, the “AIRBAG ON”

indicator light should be illumi-

nated.

the

“AIRBAG

OFF”

indicator light is illuminated, ask

the passenger to sit up straight,

well back in the seat, feet on the

floor, and with the seat belt worn

correctly. If the “AIRBAG OFF”

indicator light still remains illumi-

nated, either ask the passenger to

move to the rear seat, or if that is

not

possible,

move

the

front

passenger seat fully rearward.

Wear the seat belt properly.

Make sure the front passenger’s

seat belt tab has not been left in-

serted into the buckle before some-

one sits in the front passenger

seat.

Do not apply a heavy load to the

front passenger or equipment (e.g.

armrest or seatback pocket).

Do not put weight on the front pas-

senger seat by putting your hands

or feet on the front passenger seat

seatback from the rear passenger

seat.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands