Toyota 2007 Highlander Owner'S Manual Download Page 356

Page: 356 / 439

’07 HIGHLANDER_U (L/O 0608)

332

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Discharged

battery

Booster

battery

Positive

terminal

(“+” mark)

Jumper

cable

Positive

terminal (“+”mark)

4. Make the cable connections in the or-

der a, b, c, d.
a. Connect the clamp of the positive

(red)  jumper  cable  to  the  positive  (+)
terminal  on  the  discharged  battery.
b.  Connect  the  clamp  at  the  other  end

of the positive (red) jumper cable to
the positive (+) terminal on the booster

battery.

Jumper cable

Booster

battery

Discharged

battery

Negative

terminal (“

−

”mark)

c. Connect the clamp of the negative

(black) jumper cable to the negative (

−

)

terminal  on  the  booster  battery.
d.  Connect  the  clamp  at  the  other  end
of  the  negative  (black)  jumper  cable  to

a solid, stationary, unpainted, metallic

point of the vehicle with the discharged
battery.
The recommended connecting points

are shown in the following illustrations:

Connecting point for 2.4 L 4

−

cylinder

(2AZ

−

FE) engine

Connecting point for 3.3 L V6 (3MZ

−

FE)

engine

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands