Toyota 2007 Highlander Owner'S Manual Download Page 368

Page: 368 / 439

’07 HIGHLANDER_U (L/O 0608)

344

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

8. Reinstall all the wheel nuts fin-

ger tight.

Reinstall the wheel nuts (tapered end

inward) and tighten them as much as

you can by hand. Press back on the

tire back and see if you can tighten

them more.

CAUTION

Never use oil or grease on the

bolts or nuts. Doing so may lead

to overtightening the nuts and

damaging the bolts. The nuts

may loose and the wheels may

fall off, which could cause a seri-

ous accident. If there is oil or

grease on any bolt or nut, clean

it.

9. Lower the vehicle completely

and tighten the wheel nuts.

Turn the jack handle counterclock-

wise to lower the vehicle.
Use only the wheel nut wrench and

turn it clockwise to tighten the nuts.

Do not use other tools or any addition-

al leverage other than your hands,

such as a hammer, pipe or your foot.

Make sure the wrench is securely en-

gaged over the nut.

—Reinstalling wheel nuts

—Lowering your vehicle

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands