Toyota 2007 Highlander Owner'S Manual Download Page 284

Page: 284 / 439

’07 HIGHLANDER_U (L/O 0608)

260

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

5. Remove the filter from the filter

case.

6. Inspect the filter on the surface.

If it is dirty, it should be replaced.

When installing the filter and filter

case, keep the arrow pointing up.

INFORMATION

The air filter should be installed prop-
erly in position. The use of air condi-

tioning with the air filter removed

may cause deteriorated dustproof per-
formance and then affect air condi-

tioning performance.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands