Toyota 2007 Highlander Owner'S Manual Download Page 366

Page: 366 / 439

’07 HIGHLANDER_U (L/O 0608)

342

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Never use oil or grease on the

bolts or nuts. The nuts may loose

and the wheels may fall off,

which could cause a serious ac-

cident.

5. Position the jack at the correct

jack point as shown.

Make sure the jack is positioned on

a level and solid place.

6. After making sure that no one

is in the vehicle, raise it high

enough so that the spare tire

can be installed.

Remember you will need more ground

clearance when putting on the spare

tire than when removing the flat tire.
To raise the vehicle, insert the jack

handle into the jack (it is a loose fit)

and turn it clockwise. As the jack

touches the vehicle and begins to lift,

double

−

check that it is properly posi-

tioned.

—Positioning the jack

—Raising your vehicle

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands