Toyota 2007 Highlander Owner'S Manual Download Page 57

Page: 57 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

TESTING THE SYSTEM

1. Open all the windows.
2. Set the system as described above.

The side doors and back door should

be locked with the key or wireless re-
mote control transmitter. Be sure to

wait until the indicator light starts flash-

ing.

3. Unlock any door from the inside. The

system should activate the alarm.

4. Stop the alarm as described above.
5. Repeat this operation for the other

doors and hood. When testing the
hood, also check that the system is

activated when the battery terminal is

disconnected and then reconnected.

If the system does not work properly,

have it checked by your Toyota dealer.

This indicates that the fuel filler door

is on the left side of your vehicle.

1. To open the fuel filler door, pull the

lever up.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

Fuel tank cap

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Toyota 2007 Highlander, Owner'S Manual, Page: 57 / 439

Search results

Summary of Contents for 2007 Highlander

Reviews: