Toyota 2007 Highlander Owner'S Manual Download Page 409

Page: 409 / 439

’07 HIGHLANDER_U (L/O 0608)

385

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

CAUTION

Keep your tires properly inflated.

Otherwise, the following condi-

tions may occur and cause an ac-

cident resulting in death or seri-

ous injuries.
Low tire pressure (underinfla-

tion)—

Excessive wear

Uneven wear

Poor handling

Possibility of blowouts from an

overheated tire

Poor sealing of the tire bead

Wheel deformation and/or tire

separation

A greater possibility of tire

damage from road hazards

High tire pressure (overinfla-

tion)—

Poor handling

Excessive wear

Uneven wear

A greater possibility of tire

damage from road hazards

Tread wear indicator

CHECKING YOUR TIRES
Check the tire’s tread for tread

wear indicators. If the indicators

show, replace the tires. The loca-

tion of tread wear indicators is

shown by the “TWI” or “

∆

” marks,

etc., molded on the sidewall of

each tire.

Checking and replacing tires

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands