Toyota 2007 Highlander Owner'S Manual Download Page 88

Page: 88 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

If the seat belt extender has been

connected to the driver’s seat belt

buckle without wearing the seat belt

when using the extender in the

driver’s seat, the SRS driver’s air-

bag system will judge that the driv-

er wears the seat belt even if not

wearing it. In this case, the driver’s

airbag may not activate correctly,

causing death or serious injury in

the event of collision. Be sure to

wear the seat belt with the seat belt

extender.

Make sure the “AIRBAG ON”

indicator light is illuminated when

using the seat belt extender for the

front

passenger

seat.

the

“AIRBAG OFF” indicator light is

illuminated, disconnect the extender

tongue from the seat belt buckle,

then

reconnect the seat belt.

Reconnect the seat belt extender

after making sure the “AIRBAG ON”

indicator light is illuminated. If you

use the seat belt extender while the

“AIRBAG OFF” indicator light is

illuminated, the front passenger

airbag and side airbag on the front

passenger side may not activate

correctly, causing death or serious

injury in the event of collision.

Be sure to wear the seat belt with-

out the seat belt extender if you

can fasten the seat belt without the

extender.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-

ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,

the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury

to the child or other passengers in

the event of collision.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands