Toyota 2007 Highlander Owner'S Manual Download Page 114

Page: 114 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Toyota strongly urges use of a
proper child restraint system which

conforms to the size of the child,

installed on the rear seat. Accord-
ing to accident statistics, the child

is safer when properly restrained in

the rear seat than in the front seat.

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”
indicator light is illuminated. In the

event of an accident, the force of

the rapid inflation of the front pas-
senger airbag can cause death or

serious injury to the child if the
rear

−

facing child restraint system is

installed on the front passenger

seat.

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,
because the front passenger airbag

could

inflate with considerable

speed and force. Otherwise, the
child may be killed or seriously in-

jured.

Do not allow the child to lean his/
her head or any part of his/her

body against the door or the area
of the seat, front or rear pillar or

roof side rail from which the side

airbags or curtain shield airbags
deploy even if the child is seated in

the child restraint system. It is dan-

gerous if the side airbag and/or
curtain shield airbag inflate, and the

impact could cause death or seri-

ous injury to the child.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-

ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,

the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury

to the child or other passengers in

the event of collision.

Make sure that you have complied

with all installation instructions pro-
vided

the

child

restraint

manufacturer and that the system is

properly secured. If it is not se-
cured properly, it may cause death

or serious injury to the child in the

event of a sudden stop or accident.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands