Toyota 2007 Highlander Owner'S Manual Download Page 413

Page: 413 / 439

’07 HIGHLANDER_U (L/O 0608)

389

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

Side chain

Cross chain

TIRE CHAIN SELECTION
Use the tire chains of correct size.

Use the following type chains.

mm (in.)

A Diameter of side chain

3 (0.12)

B Width of side chain

10 (0.39)

C Length of side chain

30 (1.18)

D Diameter of cross chain

4 (0.16)

E Width of cross chain

14 (0.55)

F Length of cross chain

25 (0.98)

Regulations regarding the use of tire

chains vary according to location or
type of road, so always check them

before installing chains.

NOTICE

If the wrong combination of tire and
chain is used, the chains could dam-

age the vehicle body.

CHAIN INSTALLATION
Install the chains on the front tires as

tightly as possible. Do not use tire

chains on the rear tires. Retighten
chains

after

driving

0.5—1.0

(1/4—1/2 mile).

When installing chains on your tires, care-
fully follow the instructions of the chain

manufacturer.
If wheel covers are used, they will be

scratched by the chain band, so remove

the covers before putting on the chains.

CAUTION

Do not exceed 50 km/h (30 mph) or
the chain manufacturer’s recom-

mended speed limit, whichever is

lower.

Drive carefully avoiding bumps,

holes, and sharp turns, which may

cause the vehicle to bounce.

Avoid sharp turns or locked

−

wheel

braking, as use of chains may ad-
versely affect vehicle handling.

When driving with chains installed,

be sure to drive carefully. Slow
down before entering curves to

avoid losing control of the vehicle.
Otherwise an accident may occur.

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands