Toyota 2007 Highlander Owner'S Manual Download Page 75

Page: 75 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

RETURNING  THIRD  SEAT
Pull  the  seatback  adjusting  lever  to  un-
lock  the  seatback  and  fold  up  the  seat-

back to its upright lock position.

CAUTION

When returning the seatback to the
upright position, observe the follow-

ing precautions in order to prevent

death or serious injury in a collision
or sudden stop:

Make sure the seatback is securely

locked by pushing forward and rear-
ward on the top of the seatback.

Failure to do so will prevent the

seat belt from operating properly.

Make sure the seat belts are not

twisted or caught under the seat
and are arranged in their proper

position and are ready to use.

To flatten the seatbacks, do the follow-

ing:

1. Hold the center of the lever and pull

it up, sliding the second seat to the
rear

−

most position. Then pull the

seat forward slightly until it locks.

Flattening seatbacks

(manual seat)

Summary of Contents for 2007 Highlander
























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands

Toyota 2007 Highlander, Owner'S Manual

Search results

Summary of Contents for 2007 Highlander

Reviews:

Related manuals for 2007 Highlander

Brands by name

Popular brands